Therapy modes (handbook)

(Last Updated On: October 22, 2022)

The THERA device has a total of seven different therapy modes, some of which use a unique biological filter that when activated, separates the harmonious oscillations picked up from the body from the dis-harmonious ones. The harmonious oscillations being synonymous with healthy states or processes happening within the body while the dis-harmonious ones represent stressful conditions that, for one thing, obstruct healthy communication between the cells. Once the filter is activated as determined by the program parameter setting, either or both of these “streams” of oscillations can be used depending on what effect is intended by the selected program.

When the dis-harmonious, “D” oscillations are used (“passed” and not blocked by the filter), they are always “inverted” (i.e. dis-harmonious- inverted or “Di“) so that they can cancel out the original unhealthy signals within the body and inversely, whenever the harmonious, “H” oscillations are used, they are always used “as is” and never inverted so as to “boost” the original healthy signals being emitted by the body.

When the filter is not activated, again as determined by the program parameter setting, the signal that is passed back to the body continues to contain both of these components (the harmonious as well as the dis-harmonious). Understandably, this “as is” (“A“) mode therapy is not often used when taking the input information from a person’s energy field but is used instead when using purely health promoting substances such as homeopathic remedies or flower essences. This is what the input cups are for. Additionally, when this “as is” signal is used in its inverted form (i.e. “as is, inverted” or “Ai“), the input can then be taken again from the person’s energy field or from that of a substance. (When the information is taken from the energy field of the body in the Ai therapy mode, think of how that might be helpful for reducing an over-energy condition in the body which happens to be synonymous with inflammation.) When the “Ai” therapy mode is used with external substances, the type of substances should be incompatible/ detrimental, such as allergens, toxins, metals or pathogens so that the energy patterns from these substances or organisms within the body can be cancelled out (thus, providing relief for the body’s regulatory systems as well as the various tissues and organs). Note: both “Di” and “Ai” therapy mode programs that work this way with substances are called neutralization programs.

Therapy mode options and their typical applications (the THERA filter is incorporated as needed):

  1. H = healthy, harmonious (only the harmonious information is used/passed by the filter) – Mostly used in programs that take their input information from the person’s energy field and can produce a stabilizing affect.
  2. Di = dis-harmonious inverted (only the mirror/counter image of the disturbing signals is used/passed by the filter) – Mostly used in programs that either take their input information from a person’s energy field or from stressor information via either native substances or premanufactured vials.
  3. H+Di = both therapy modes applied at the same time (the amplitude of each of these signals can be separately controlled) – Mostly used in programs that take their input information from the person’s energy field and can produce relief from disruptive influences as well as have a stabilizing affect.
  4. A = entire signal (unfiltered), “as-is” or “all frequencies” which is “in-phase” with the oscillations of the source from whence it was taken (used to stabilize/ strengthen body functions when used with beneficial external substances) – Mostly used in programs that are meant to be used with supportive / stabilizing substances in the input cup.
  5. Ai = entire signal (unfiltered) but inverted 180 degrees (out of 360) “out of phase” with the oscillations of the source from whence it was taken or “all frequencies, inverted” (used to neutralize the effect of stressful substances, e.g. allergens, toxins, metals, pathogens, etc.) – Mostly used in programs that are meant to be used with stressor information from either native substances or premanufactured vials in the input cup.
  6. Ai + A = both therapy modes used in alternation, one after the other, to “unblock” a tissue or process so that it will begin to respond again. The timing is 20 seconds of “Ai” therapy followed by 5 seconds of “A” which is continuously repeated – Can be used with both body-oscillation programs and with programs that are meant to be used with external substances. The former being used to unblock a “stuck” regulatory system and the latter being used to alter the immune system’s state of resignation associated with a specific stressor (as with chronic/ yin conditions).
  7. A + Ai = similar to Ai+A except timing is reversed: 20 seconds of “A” therapy followed by 5 seconds of “Ai” – applications of this mode will be discussed in advanced courses.

Attention: please note the term “all frequencies” is used two different ways in the language of biofield therapy. You need to look to the context of what is being said in order to determine what it is referring to. The following are the two ways this term is used in biofield therapy:

  1. As discussed above, this application is to indicate the type of therapy mode: “all frequencies” refers to when both the harmonious and dis-harmonious portions of a signal are being used (i.e., the biological filter is not being used).
  2. To indicate what frequencies are being used (see next section): “all frequencies” indicates that information/ oscillations of every frequency within both of the bandpass frequency ranges and beyond are being used (i.e., the bandpass filter is disabled). This is like listening to all the radio stations at once in both the AM or FM frequency bands. (I.E., this has to do with the frequency of the signal being used).

The following is a schematic diagram showing how the various therapy modes are created within the Thera device. The resultant therapy modes are shown on the right side of the diagram. Note, this diagram is showing the “closed-loop” therapy configuration, meaning the client is at both the input and the output (i.e., information is being taken from the energy field of the client and not from some “external substance” placed in the input cup).